静电过粉机6A

用途 Usage

适用于各种电缆线，电源线，护套线、硅胶线，芯线绞合的过粉生产过程。suitable for all kinds of cable, power cord, sheath wire,silicone wirecore wire stranded over powder production process

工作原理 Working principle

通过喷粉方式，加注静电使电线表面自动吸附滑石粉。through the way of powder spraying, adding static electricity to makethe wire surface automatically adsorption talc powder

优点 Advantages

1.使线材绝缘层表面上粉更均匀，稳定。

2.可以调控线材上粉的密度(粉量),适合各种客户的不同要求

3.使用内部循环系统，减少滑石粉泄漏,漂浮环境中,能改良工作环境。

4.自动加粉功能:缺粉或中途加粉无需人工手动加粉。

5.先进的滤网清洁模式,保养清洁设备周期更长。

1.the wire insulation layer on the surface of powder more uniform, stable2.can adjust the density of wire powder (powder amount),suitable for a variety of customers with diferentrequirements.3.Use internal circulation system, reduce talc leakage, floating environment,.can improve the working environment.

4.automatic adding powder function: lack of powder or add powder halfway without manual add powder5.advanced net cleaning mode, maintenance and cleaning equipment longer cycle.

参数表 Parameter Table

型号 Model：QP-6A

中心高度Center height：1000mm(支持1000mm以上定做)1000mm(support more than 1000mm custom

通过最大线径Through the maximum line diamete：38mm(38mm以上外径可定做)38mm(more than 38mm outside diameter can be customized

电源Power supply：220V AC 50/60HZ

最大功率Maximum power：2.2KW

气源气压Air supply pressure：0.5MPa以上(5KG)0.5 mpa or more (5KG)

滑石粉Talcum powder：800目或以上 800 mesh or above

机台尺寸(mm*mm*mm)Machine size(mm*mm*mm)：长*宽*高860*970*1615Length*width*height860*970*1615

重量Weight：325KG